Descrizione
With the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers!
The solution is our MXLR Front Body Support for the Tamiya TRF421 which
- prevents deflection of the bodyshell under higher speeds
- reduces the risk of cracking the front wheel arches of the bodyshell
The result is an extended lifetime of your bodyshells combined with better performance on the track as the shell will stay in its original shape and produce more downforce!
Our MXLR Front Body Support is made of flexible and durable plastic! In the design process we took special care about the TRF421 front bulkhead design and the importance of "flex" in this area. Our Front Body Support is designed to have the least flex influence possible!
Installation info’s
#1: Choose an optional M3 round head screw (which is not included) to fine adjust, depending on the height of your bodyshell.
#2: Screw the M3 screw in the top hole of the Front Body Support. As there is no thread pre-cutted, you will need a bit more power for the first installation! The screw will cut the thread itself into the Nylon material. We recommend doing this before you install the Front Body Support into your car!
#3: You can use it either with or without the standard graphite stiffener. If you want to use it with the stiffener you need to use longer screws (which are not included).
#4: Set the Front Body Support to the correct height! The screw should touch the hood without additional free play when the bodyshell itself is resting on the front bodypost clips/orings.
Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.
MAX-09-022 contains:
1x Front Body Support for Tamiya TRF421
